Basic description: micro processor-controlled switch, one input, one output, what can work as a regulator or a switch, power supply voltage to 16 V, current up to 7 A.
One channel switch-controller RST7A is designed to control one independent load (motors, LEDs, siren, light bulbs, etc.) by one channel of radio control system. Channel can be operated as a controller or switch.
PWM maximum limit of the controller can be set to any value between 0 and 100 %.
The switch output can only be switched on and off or there can be set sequence of repeated switch-on and switch-off of the output by up to 20 sections. The duration of each segment can be set from 100 ms up to 5.1 seconds with a step of 100 ms. You can easily set the flashing lights 1:1 for model of car as to generate a sequence of SOS (... - - -...) for a ship model.
The switch in case of loss of signal from the receiver begin to generate the replacement of pulses that can be preset.
Control circuit of the switch-controller is powered from the receiver (3.5 to 6 V), load in the two channels can be supplied with voltage from 0.5 to 16 V. The maximum output current in both channels can be up to 7 A. Dimmension are 25 x 10 x 5 mm and weight 6 g.
Examples of using: - for control of right and left turn signals in the car,
- step-less speed controlling in the twin models of ships, aircraft or tracked vehicles - as flasher (without control with radio system)