!_zmenit jazyk cz_! !_zmenit jazyk en_!
Number of items: 0 0,00 Kč
BEL shop
Hobby electronics, components for solar energy, equipment development

Battery monitor - current measuring and switching board MB50-MPO

Basic description: The MD50-MPO is used to measure current and disconnect the load or charger in the event of a battery hazard. It can not be used alone with the MB50 or MB60 control board only.

click to enlarge
Monitor baterie MB50-MPO
Monitor baterie MB50-MPO Monitor baterie MB50-MPO Monitor baterie MB50 sestava
pcs
Manufacturer:BEL
Price with VAT : 1 500,00 Kč
VAT:21 %
!_sleva celkem_!:50 %
Original price with VAT:3 000,00 Kč
Availability:In stock

Basic description of battery monitor MB50:

The MB50 battery monitor is a modular system (consisting of three types of MB50-RD, MB50-MNV and MB50-MPO), dedicated lithium battery voltage monitoring, automatic voltage compensation, current measurement and disconnection of the consumer or charger. The system can handle batteries of 1 to 96 cells of any type with a maximum voltage of 4.3 V per cell. The voltage of all cells, unlike competing products, is measured by one input of one microprocessor, there is no need to use voltage transducers or a bus to communicate with a group of microprocessors. As a result, there is no scatter of the measured values due to external circuits and all voltages are readily comparable. Another advantage of the system is that it does not need an external source to power, powered by the currently most charged cell. When the battery is discharged, monitoring is complete and the system disconnects completely from the battery to prevent it from continuing. If the battery should be monitored continuously, the system can be powered by an external 5V supply.

Current Measurement and Switching Board MD50-MPO:

the MD50 system also has a plate that measures charging and discharging currents and sends the data to the processor on the control board. It also connects or disconnects the charger or appliance from the battery according to the control board instructions. MB50-MPO is not required for MB50. The use of this board is optional, but without it there is no information about currents and charges in the battery.

Other MB50 battery monitor components ....

Control board MB50-RD:

It is the basic module of the system and controls its operation. It is operated with four buttons, the measured data is displayed on the two-line display. The sound signaling of battery faults is on the siren board and two relays, indicating low or high battery voltage. A battery pack (2x AAA) is also placed on the board to start monitoring by pressing the START button. In order for MB50 to work, one MB50-RD board must be used.

Voltage measurement and balance board MB50-MNV:

each for up to 8 cells. Expansion board can be connected at the same time up to 12 (they connect to the control board and an eight-pin cable). The boards are designed to pin the voltage of individual cells to the processor on the control board so that it can measure and compensate by discharging the cells with too high a voltage. The number of boards used is determined by the total number of battery cells divided by 8. To operate the MB50 system, at least one MB50-MNV board must be used.

MB50 basic technical data:

Cell voltage: may range from 1.5 to 4.3 V.

Power: Currently the strongest cell battery or external power supply 5V.

Balancing current: max. 5 A per cell.

Maximum buffer capacity: maximum 70 watts per plate for natural cooling, maximum 170 watts for forced fan cooling (special accessories).

Maximum allowable charging current: 100 A *.

Maximum allowable discharge current: 100 A *.

Battery capacity: adjustable from 1 Ah to 1000 Ah. *

Minimum permitted cell voltage: adjustable from 1.5 V to 50 mV step.

Maximum permitted cell voltage: adjustable to 4.3 V at 50 mV step.

Maximum allowable cell voltage difference: adjustable from 5 to 50 mV in 5 mV increments.

Repetition cell count interval: adjustable to 0.1 or 0.5 to 5 minutes.

Measured and displayed quantities: voltage of individual cells, current, minimum and maximum battery voltage, current, minimum and maximum cell voltage, charging and discharging current, * supplied and removed charge, * estimated current charge in battery.

Operating temperature: 0 to 40 ° C.

Working humidity: up to 80%.

Board dimensions: 169 x 81 x 55 mm.

* only when the current measurement board and MB50-MPO disconnection are connected.

Delivery time 2 to 3 weeks after ordering.

Your question Battery monitor - current measuring and switching board MB50-MPO

!_vase jmeno, prijmeni, firma_!:*
Your email:*
Your phone number:*
Your question:*
Type the code please:* antispam
     !_vice informaci_!

!_poslete odkaz svemu znamenu_!

Your name
Your email
!_email vaseho znameho_!
!_opiste kod z obrazku_! antispam
Copyright © www.bel-shop.eu by Shop5.cz

© www.bel-shop.eu

!_pri poskytovani sluzeb nam pomahaji soubory cookie. pouzivanim nasich sluzeb vyjadrujete souhlas s nasim pouzivanim souboru cookie._!   More information